Building code evaluation or compliance reports are issued to product manufacturers by agencies such as the International Code Council Evaluation Services (ICC ES), Intertek Building Products Certification Services, Underwriters Laboratories (UL), and the Uniform Evaluation Services (UES). Commonly referred to as code reports, these are technical evaluations that provide a means for manufacturers to demonstrate a product or system complies with a particular building code or acceptance criteria. Also, generally included in the report is information related to product installation, identity, uses, limitations and much more.
Code Reports can typically be accessed through the manufacturer or issuing agency where they are normally organized according to the Construction Specifications Institute's (CSI) MasterFormat® which for Exterior Insulation and Finish Systems (EIFS) is Division – 07 00 00 (Thermal and Moisture Protection) and Section 07 24 00 (Exterior Insulation and Finish Systems).
EIMA manufacturer member code reports for EIFS and other products can be found in the table below, however the manufacturer or agency should be contacted for any recent updates and information.
Report Number |
Manufacturer |
Product |
Report Number: |
UES ER 0433 |
Manufacturer: |
Master Wall Inc.® |
Product: |
AGGRE-FLEX CLASS PB EIFS;
AGGRE-FLEX DRAINAGE CLASS PB EIFS;
ROLLERSHIELD DRAINAGE CLASS PB EIFS;
AND QRW1 DRAINAGE CLASS PI EIFS
|
Report Number: |
ESR-1030 |
Manufacturer: |
STO Corp. |
Product: |
Sto RainScreen and Sto RainScreen II Class PB Exterior Insulation and Finish Systems with Drainage |
Report Number: |
ESR-1232 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
Dryvit Outsulation® System |
Report Number: |
ESR-1543 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
Dryvit Oustsulation® Plus MD System |
Report Number: |
ESR-1547 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
Dryvit Outsulation® RMD System and Outsulation® SMD System Exterior Insulation and Finish Systems (EIFS) |
Report Number: |
ESR-1689 |
Manufacturer: |
ParexUSA, Inc. |
Product: |
Parex USA WaterMaster LCR System, LaHabra Watermaster LCR and El Rey WaterMaster LCR Systems |
Report Number: |
ESR-1692 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
Dryvit Outsulation® LCMD Systems 1-5 |
Report Number: |
ESR-1693 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
Dryvit Infinity® System (EIFS) |
Report Number: |
ESR-1720 |
Manufacturer: |
STO Corp. |
Product: |
StoTherm® EIFS: StoTherm Classic, StoTherm Premier, StoTherm Essence and StoTherm Lotusan |
Report Number: |
ESR-1748 |
Manufacturer: |
STO Corp. |
Product: |
StoTherm® NExT® |
Report Number: |
ESR-1821 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
Dryvit Outsulation® MD System® Exterior Insulation and Finish System (EIFS) |
Report Number: |
ESR-1878 |
Manufacturer: |
Master Builders Solutions |
Product: |
Senergy Senerflex Channeled Adhesive CI Design, Senerflex Channeled Insulation Design, Senerflex Channeled Adhesive CI Design with MaxGrip Veneer Mortar and Senerflex Vulcan NC |
Report Number: |
ESR-1935 |
Manufacturer: |
ParexUSA, Inc. |
Product: |
Teifs PERMADRY, TeifsWEATHERTIGHT and TeifsPERMADRAIN Wall Systems |
Report Number: |
ESR-2022 |
Manufacturer: |
Master Builders Solutions |
Product: |
Senergy® Cement-Board Stucco™ 500 System and Senergy® Cement-Board Stucco™ 1000 System |
Report Number: |
ESR-2186 |
Manufacturer: |
Master Builders Solutions |
Product: |
Finestone® Pebbletex-DCA and Pebbletex-DCA with Channeled Insulation Exterior Insulation and Finish Systems (EIFS) and Pebbletex-DCA with MaxGrip Veneer Mortar |
Report Number: |
ESR-2357 |
Manufacturer: |
Master Builders Solutions |
Product: |
Finestone® Finescreen 500 System and Finestone® Finescreen 1000 System |
Report Number: |
ESR-2536 |
Manufacturer: |
STO Corp. |
Product: |
StoQuik™ Silver I, StoQuik™ Silver II and StoQuik™ Silver NExT Cement Board Stucco Systems |
Report Number: |
ESR-2562 |
Manufacturer: |
ParexUSA, Inc. |
Product: |
Parex WaterMaster GX System, Parex Standard WaterMaster System, LaHabra Insul-Flex Watermaster System and El Rey Insul-Flex Watermaster System |
Report Number: |
ESR-2563 |
Manufacturer: |
ParexUSA, Inc. |
Product: |
PAREX STANDARD SYSTEM, LAHABRA INSUL-FLEX STANDARD SYSTEM AND ELREY INSUL-FLEX STANDARD SYSTEM (STANDARD SYSTEMS) |
Report Number: |
ESR-2861 |
Manufacturer: |
ParexUSA, Inc. |
Product: |
TeifsFlex and TeifsAirtight Systems |
Report Number: |
ESR-2931 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
DRYVIT PREFABRICATED FOAM PLASTIC FORMED SHAPES |
Report Number: |
ESR-3186
ESR-1689 |
Manufacturer: |
ParexUSA, Inc. |
Product: |
Converted to ESR-1689 |
Report Number: |
ESR-3295 |
Manufacturer: |
Dryvit Systems, Inc. |
Product: |
Dryvit Outsulation® X System |
|